Teledyne T3DSO1000, Руководство пользователя, Страница: 213 / 227

User Manual 195
When Vout/Vin mode is enabled, the Y-Axis can be set to linear or
logarithmic by pressing
Axis Type softkey. When Vout mode is enabled,
there are six types unit can be chosen by pressing Unit softkey.
（
2
）
Press Phase softkey to enter the Phase menu.
●
Press Scale softkey, then turn the Universal Knob to select the desired
value.
●
Press Ref Level softkey, then turn the Universal Knob to select the
desired value or press the Universal Knob then enter the value by the
pop keyboard.
●
Press Unit softkey to set the unit to deg or rad.
●
Press Auto Set softkey to set the appropriate parameters for the
frequency response phase curve automatically.
（
3
）
Press Cursors softkey enter the Cursors menu. Press Status softkey in this
menu can enable or disable the cursors function. The details of cursors see
Chapter “Cursors”.
3. Press Data softkey to enter the Data menu. All the parameters in this menu are used
to configure the bode chart.
Figure 111 Bode plot data menu
（
1
）
Press List softkey to select “On” or “Off” to turn on or turn off the list table.
When the list is on, press Scroll softkey, then turn the Universal Knob to
select the frequency point or press the Universal Knob then enter the
number of the frequency point by the pop keyboard.
Figure 112 Bode plot list on