Teledyne T3DSO1000 Скачать руководство пользователя страница 184

Страница: 184 / 227

166 User Manual

Note: the internal memory can only save one test mask; saving a new test mask
will erase the old one.

Save and Recall Test Masks

Users can save the current test mask to the internal Flash memory or external USB flash

device. The file format of the test mask file is “*.RGU”.

Save Test Mask to Internal Memory

1. Press the

Utility

button on the front panel to enter the UTILITY function menu.

2. Press the

Next Page

softkey to go to the second page of the UTILITY function

menu.

3. Press the

Pass/Fail

softkey to enter the PASS/FAIL function menu.

4. Press the

Enable Test

softkey to select

to enable the pass/ fail test.

5. Press the

Source

softkey to select the desired channel.

6. Press the

Mask Setting

softkey to enter the MASK function menu.

7. Press the

X Mask

Y Mask

softkey; and then turn the

Universal Knob to

select

the desired value.

8. Press the

Location

softkey to select

Internal

9. Press the

Save

softkey to save the mask to internal memory.

10. A few second later the message “

Store Data Success!

” will be displayed.

Recall Test Mask from Internal Memory

1. Press the

Utility

button on the front panel to enter the UTILITY function menu.

2. Press the

Next Page

softkey to go to the second page of the UTILITY function

menu.

3. Press the

Pass/Fail

softkey to enter the PASS/FAIL function menu.

4. Press the

Enable Test

softkey to select

to enable the pass/ fail test.

5. Press the

Mask Setting

softkey to enter the MASK function menu.

6. Press the

Location

softkey to select

Internal.

7. Press the

Load

softkey to recall the saved interval memory.

8. A few second later the message “

Read Data Success!

” will be displayed and

the saved mask will be displayed on the screen.

Содержание T3DSO1000




































































































































































































































Результаты поиска

Содержание T3DSO1000

Отзывы:

Teledyne T3DSO1000, Руководство пользователя, Страница: 184 / 227

Результаты поиска

Содержание T3DSO1000

Отзывы: