Teledyne T3DSO1000, Руководство пользователя, Страница: 116 / 227

98 User Manual
Figure 48 BUS CONFIG Menu
9. Press Baud softkey to set baud rate.
●
The baud rate can be set as a predefined value.
●
If the desired baud rate is not listed, press Baud and select custom option,
press the Custom and turn the Universal Knob to set the desired baud rate.
10. Press Data Length softkey and set byte bits (5-8) using the Universal Knob.
11. Press Parity Check softkey to set the type of parity check (Even, Odd or None).
12. Press Stop Bit softkey to set the length of stop bit (1, 1.5 or 2 bits).
13. Press Next Page softkey.
14. Press the Bit Order softkey to select the bit order ( LSB or MSB ).
15. Press Idle Level softkey to set the idle level (LOW or HIGH).