TD iWL252, Руководство пользователя, Страница: 36 / 54

- 30 -
b) When the base and terminal are successfully connected the screen will display
BASE ASSOCIATION
OK
.
Remove Base
c) The Bluetooth base and terminal are now disconnected from one another.
Print Bases
d) The terminal prints the base name, serial number and Bluetooth address. The base name is the
number that you see on the terminal screen under the
B
.
Communications (TD iWL255 Wireless 3G)
The terminal communication settings are preset and it will not work correctly if you make any changes.
General options
Use these options to configure your terminal’s volume, screen brightness and other general settings.
Training mode
This option allows a Manager or Supervisor to sign in and train a new user on the functions of the terminal without
impacting any live transactions or totals. While in Training Mode the user can perform all transactions except for any
configuration changes or chip card transactions. When in training mode:
1.
Press /
Admin
key  Other Functions  Training Mode.
2. Enter or exit training mode ( 1 - Enter or 2 - Exit).
3. Training mode is now enabled/disabled depending upon your selection. You will return to the Idle screen with
the word Training .
Keystroke sounds
This option allows you to enable or disable the beeps when keys are pressed.
1. Press / Admin key  Setup Menu  Customization  Hardware Options  Key Beep .
2.
Select the desired option (
1
- All Off or
2
- All On or
3
- Invalid Only).
» All Off – The terminal will beep on every key press. This is the default.
» All On
– The terminal won’t beep when keys are pressed.
»
Invalid Only – The terminal will only beep when an invalid action is performed.
3.
The new keystroke sounds are now changed to your selection.
Terminal backlight
This option allows you determine when the screen light is on.
1.
Press /
Admin
key  Setup Menu  Customization  Hardware Options 
Backlight
.
2. Select the desired option ( 1 - Always Off or 2 - Always On or 3 - On / Key Press).
» Always On
– The screen will always be lit. This is the default.
» Always Off – The screen will always be off until a transaction is initiated.
» On / Key Press
– The screen will turn on when a key is pressed or a card is swiped.
3. The backlighting setting is now changed to your selection.
• The Idle screen will display the word Training .
• All screen names will have a (D) at the end to indicate that you are in demo/training mode – Sale (D), Main Menu (D), etc.
• You can create, edit and delete users that will be active after you exit training mode.
• Receipts will include **** Training Mode **** under the transaction type.