TD iWL252, Руководство пользователя

Страница: 34 / 54

- 28 -
Function Settings Explanation
Supervisor Protection Batch Reports
Business Day Reports
Customized Reports
Day Close
Manual Account #
Recent Error Report Call in.
Login requirements for terminal functions
This option allows you to determine which functions require a manager or supervisor to enter their login ID and password.
Functions will only appear in the option list if they can be ID and password protected. The same steps are used to disable
user id and password requirements. See the following list of available functions and reports:
Function Settings Explanation
End of Day
Manual Account #
Batch Reports
Business Day Reports
Customized Reports
Batch Close
Recent Error Report On/Off Enables/disables supervisor protection
on this function.
1.
Press /
Admin
key  Setup Menu  Customization 
Authority Setup
.
2.
Select the
function
(see list below) you wish to change the login requirements for and press
OK
.
3. Confirm you want to change this function to require a user ID and password ( Yes or No ).
4. The user ID and password requirement is now enabled/disabled on this function.
Configuration reports
Use this report to print a report of all your configuration settings.
1. Press / Admin key  Setup Menu  Config. Reports and one of the following: Communications ,
Customization , Host 1 Settings , Host 2 Settings or BIN Ranges .
2.
Confirm that you want to print the report (
Yes
or
No
).
» Communications – A report will print with all of your communication settings.
» Customization
– A report will print with all of your customized settings that are protected by a
supervisor ID and password and if your end of day process requires a user ID and password.
»
Host 1 Settings – A report will print with all of your Host 1 settings and their values.
» Host 2 Settings – A report will print with all of your Host 2 settings and their values.
Communications (TD iWL252 Bluetooth)
Use these options to change communication settings on your Bluetooth terminal.
This option is only used when calling into Help Desk or to ensure that all your terminals have the same settings.
You must enter a valid supervisor ID and password to access this option.