TANDBERG RDX QuikStation, Руководство по эксплуатации продукта

Страница: 9 / 130

O
CTOBER
2011
RDX Q
UIK
S
TATION
IX
A
BOUT
T
HIS
M
ANUAL
A
BOUT
T
HIS
M
ANUAL
This manual describes how to install and operate the RDX QuikStation and is
intended for use by anyone deploying the RDX QuikStation into their
network environment. Familiarity with system and network configuration is
highly recommended.
The following chapters are included in this manual:
Overview
 Chapter 1 provides an overview of the RDX QuikStation’s features and
components.
Installation setup
 Chapter 2 describes information on how to rackmount, connect, and
initially configure the RDX QuikStation.
 Chapter 3 describes how to connect host computers to RDX QuikStation
iSCSI targets, including how to set up iSCSI security.
Using the RDX Remote Management Console
 Chapter 4 describes RDX QuikStation system tasks, such as network
configuration, and user account management.
 Chapter 5 provides information about the logical device interface in the
Remote Management Console.
 Chapter 6 provides information about the physical device interface in the
Remote Management Console.
 Chapter 7 describes RDX QuikStation system maintenance tasks, such as
performing diagnostic tests, cloning data, and updating firmware.
Supplemental Information
 Appendix A provides error code definitions and some basic troubleshooting
information.
 Appendix B provides product specifications.
 Appendix C describes important safety precautions to take when using the
RDX QuikStation.