TANDBERG RDX QuikStation, Руководство по эксплуатации продукта

Страница: 20 / 130

10
P
RODUCT
M
ANUAL
1019786
C
HAPTER
2—I
NSTALLATION AND
S
ETUP
P
REPARING FOR
I
NSTALLATION

For all host computers that will be backed up by the RDX QuikStation, verify
that the host computer OS has iSCSI initiator software installed.

Verify all items are included in the accessory kit (see page 11 ).

Keep the packing materials and box in case you need to ship the unit later.

Select an appropriate location —The maximum recommended ambient
temperature for the RDX QuikStation is 35° C (95° F). Install the appliance in
an environment that is compatible with this temperature limit. Use a
ventilated rack to ensure the appliance receives adequate air flow required
for safe operation.

Select an appropriate power source — The AC input for the RDX QuikStation
is 100-240 VAC, and the rated input current is 2,0 -1,0A. Keep this information
in mind when selecting a power source to prevent circuit overload. Plug the
appliance’s power cord into a high-quality power strip that offers protection
from electrical noise and power surges. An uninterruptible power supply
(UPS) is recommended.

Ensure that the work area is free from conditions that could cause
electrostatic discharge (ESD) — Discharge static electricity from your body
by touching a known grounded surface, such as a computer’s metal chassis.

Ensure the rack is placed on level ground — Use a level when installing the
rack rails to prevent any potentially hazardous conditions caused by uneven
mechanical loading.

Obtain the following items to complete the rack installation instructions

#2 Phillips screwdriver

Tape measure

Level
Windows Linux Macintosh
iSCSI initiators are
included with Windows
Server 2008 and later. If
necessary, download
and install the
appropriate iSCSI
initiator from the
Microsoft web site or
from a third-party
vendor.
iSCSI initiators are
included with most
Linux operating systems.
If necessary, download
and install the
appropriate iSCSI
initiator from your Linux
Distribution web site or
from a third-party
vendor.
Macintosh systems
require the installation of
a third-party iSCSI
initiator. We recommend
that you download and
install an iSCSI initiator
that has been tested or
recommended for use
with your chosen backup
application.