TANDBERG RDX QuikStation, Руководство по эксплуатации продукта

Страница: 22 / 130

12
P
RODUCT
M
ANUAL
1019786
C
HAPTER
2—I
NSTALLATION AND
S
ETUP
I
NSTALLING THE
RDX Q
UIK
S
TATION IN A
R
ACK
The RDX QuikStation is designed for installation in a standard (EIA-310)
4-post, 19-inch rack and uses 2 units (2U) of rack space.
The rackmount kit includes the following items:
Table 2-2 Rackmount kit contents
Rackmount Item What the item is used for
12 #10 pan-head screws To attach the bracket to the outer rail and to
secure the outer rail to the front and back-end of
the rack.
4 #10 keps nuts These are extra hardware pieces that are not
required for assembly.
4 #10 flat-head screws These are extra hardware pieces that are not
required for assembly.
8 washers To use with the #10 pan-head screws when you
attach the outer rail to the rack.
6 bar nuts To secure the outer rail to the rack and also to
secure the bracket to the outer rail.
2 rail extension brackets To attach the outer rail to the back-end of the
rack.
2 short brackets To attach the outer rail to the back-end of the
rack if the rack does not require rail extension
brackets.
2 outer rails To mount to the rack.
2 inner rails To attach to the RDX QuikStation appliance.
Includes a locking tab to keep the appliance in
place when it is fully extended from the rack.
8 #6 pan-head screws To secure the inner rail to the RDX QuikStation.
8 #6 keps nuts These are extra hardware pieces that are not
required for assembly.
2 #10 clip nuts To secure the RDX QuikStation into the rack.