TANDBERG RDX QuikStation, Руководство по эксплуатации продукта

Страница: 96 / 130

86
P
RODUCT
M
ANUAL
1019786
C
HAPTER
6—P
HYSICAL
D
EVICE
M
ANAGEMENT
E
JECTING
RDX C
ARTRIDGES
You can eject an RDX cartridge from the Remote Management Console.
However, with removable disk configurations, you cannot eject a cartridge
that is connected to a host computer unless you first enable the Unsafe Eject
option (see page 76 ).
To eject an RDX cartridge:
1. From the Physical Device interface, select the dock where the cartridge is
located.
2. Click
[Eject]
.
The RDX QuikStation ejects the cartridge. The dock displays “Empty” in
the tree view.
E
RASING
RDX C
ARTRIDGES
You can erase data and reformat an RDX cartridge as a single NTFS partition
from the Remote Management Console.
If you configure your RDX QuikStation as a virtual tape library, the RDX
cartridges are automatically formatted to use with the library. This format
partitions 8 MB as an NTFS file system. The rest of the cartridge’s capacity is
formatted to emulate a tape cartridge.
If you configure your RDX QuikStation as eight removable disks, the RDX
cartridges should be formatted as a single NTFS file partition. You can
reformat a cartridge from the Remote Management Console. If the disk is
connected to a host computer, you can also reformat the cartridge from the
host.
!
Important
Make sure that you do not have any backup jobs in progress before
you eject an RDX cartridge from the Remote Management Console.