TANDBERG RDX QuikStation, Руководство по эксплуатации продукта

Страница: 86 / 130

76
P
RODUCT
M
ANUAL
1019786
C
HAPTER
5—L
OGICAL
D
EVICE
M
ANAGEMENT
M
ANAGING
T
APE
L
IBRARY AND
A
UTOLOADER
C
ONFIGURATIONS
If you have your RDX QuikStation configured as a virtual tape library or as a
tape or disk autoloader, you can do the following tasks from the Logical
Device interface:
 View logical properties (see page 76 )
 View active iSCSI connections ( page 77 )
 Set iSCSI security for each target ( page 34 )
 Convert the logical device type ( page 48 )
 Logically move media to another slot ( page 78 )
 Set the Unique Inquiry String ( page 80 )
 Set the autoloader option to continuously rotate cartridges
(only applicable to disk and tape autoloaders)
Note: From the System Settings menu, you can set an option to allow auto-insert
(import/export functionality) of media cartridges. See page 57 for more
information.
V
IEWING
L
OGICAL
P
ROPERTIES FOR
T
APE
L
IBRARIES
/A
UTOLOADERS
The following properties are displayed for virtual tape libraries and
autoloaders.
Table 5-4 Logical properties for virtual tape libraries and autoloaders
Property Name Description
For the library/autoloader and its tape drive(s)
Element address The element address associated with the virtual location of the
library/autoloader and drives.
Vendor The vendor name for the virtual library/autoloader and drives.
For example, the vendor name for a StorageLoader tape library is “Tandberg
Data,” and the vendor name for the tape drive is “HP.”
Product The product name for the virtual library/autoloader and drives.
For example, the StorageLoader tape library product name is
“StorageLoader”. For the LTO-3 virtual tape drives, the product name is
“Ultrium 3-SCSI.”
Revision The firmware revision level for the logical device.
Serial number The serial number for the logical device.
iSCSI name The iSCSI name that identifies the library/autoloader device and its drive
targets. The iSCSI name is used to connect the initiators (host computers) to
the targets.