TANDBERG RDX QuikStation, Руководство по эксплуатации продукта

Страница: 26 / 130

16
P
RODUCT
M
ANUAL
1019786
C
HAPTER
2—I
NSTALLATION AND
S
ETUP
I
NSTALLING THE
RDX Q
UIK
S
TATION INTO THE
R
ACK
To install the RDX QuikStation into the rack:
1. Line up the rear of the inner rails with the front of the outer rails.
2. Slide the inner rails into the outer rails, keeping the pressure even on both
sides. You may have to depress the locking tabs when inserting.
3. Push the RDX QuikStation completely into the rack.
4. Use the locking screws located on each side of the RDX QuikStation to
secure it into the rack. Push and turn the locking screws clockwise to lock.
The locking screws engage the clip nut, which you installed in Step 2d of
“Installing the Outer Rails into the Rack” on page 14 .
5. Place the appliance end-cap covers that were included in your accessory kit
over the locking screws.
Figure 2-4 Installing the RDX QuikStation into the rack
locking screw
!
Important
Do not place anything on top of the rackmounted unit
when it is extended from the rack.