TANDBERG RDX QuikStation, Руководство по эксплуатации продукта

Страница: 29 / 130

O
CTOBER
2011
RDX Q
UIK
S
TATION
19
C
ONFIGURING
N
ETWORK
I
NFORMATION
3. In the network.conf file, edit the IP and subnet mask addresses to meet
your network’s requirements.
Note: You can edit the gateway address, but it is not required.
4. Remove the “#” character from each modified line so that the RDX
QuikStation can decipher the setting changes, as shown in the example
below.
5. Save the file to the root directory of the USB flash drive as “ network.conf. ” If
the flash drive that was included with your RDX QuikStation is unavailable,
you can save the file to any USB flash drive with a VFAT file system.
6. Insert the USB flash drive into the USB port located on the center-front
panel of the RDX QuikStation.
After you insert the flash drive, “Net Update” will display on all eight front
LCD panels. When the configuration download is complete, the LCD
panels display “PASSED.”
7. When the USB symbol on the center-front LED panel stops blinking and
transitions to a solid green color, remove the USB flash drive.
8. Proceed to the next section to connect to the Remote Management Console.
Figure 2-7 Example of an edited network.conf file
!
Important
The file name must remain as “ network.conf .” Otherwise,
the RDX QuikStation will not recognize the file.