SYSMEX XE-5000 Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 262

SYSMEX XE-5000 Скачать руководство пользователя страница 94

CHAPTER 6

Operation

6-40

Sysmex XE-5000 Instructions for Use

Revised July

2

007

4. After the READY LED turns off and buzzer stops, remove

the CELLCLEAN.

5. The shutdown sequence in the Main Unit will start.

6. When the shutdown sequence is completed, the message

“Turn OFF Main Unit” will appear.

7. If you wish to complete the analysis, turn OFF the Main

Unit power in the current status.

Warning!

CELLCLEAN is a strong alkaline detergent. Pay
careful attention not to let it adhere to your body or
clothes. If CELLCLEAN adheres to your body or
clothes, wash it away immediately with plenty of water.
Otherwise, it can damage your skin or clothes.

Caution!

When removing the CELLCLEAN container, pull it
down straight not to bend the manual aspiration
pipette.
Otherwise CELLCLEAN may scatter.

Note:

The manual aspiration pipette is automatically rinsed,
and does not need to be wiped manually.

Note:

If you wish to continue an analysis with the Main Unit
left ON, select “Restart” on the function menu of the
Shutdown Completion screen.
After executing an automatic rinse and background
check, the system returns to the READY status.

«
...
92
93
94
95
96
...
»

Содержание XE-5000







































































































































































































































































Отзывы:

Нет отзывов