SYSMEX XE-5000, Инструкция по эксплуатации, Страница: 170 / 262

CHAPTER 9 Cleaning and Maintenance
9-42 Sysmex XE-5000 Instructions for Use
R
e
vi
se
d A
p
ri
l 20
07
E
U
1. Turn OFF the Main Unit power and open the front cover.
2. Loosen the fixing screws and remove the CP cover.
3. Remove the hand clipper fixing screws (2 places) and
remove the hand clipper.
4. Hand Clipper for Mixing Only:
Remove the fixing plate from the old hand clipper for
mixing.
The hand clipper for mixing does not use the F-bracket
provided with a new hand clipper.
Remove the F-bracket from the new hand clipper and
attach the fixing plate (just removed) on the new hand
clipper for mixing.
5. Install the new hand clipper to the original position using
screws removed in step (3).
Please note:
Hand clipper for mixing uses fixing plate. Hand clipper for
piercing uses F-bracket.
6. Install the CP cover.
7. Close the front cover.
Information
In case of connecting to the HST System, remove the
F-bracket.
Caution!
When installing the CP cover, take care not to have
the tube caught or bent.
Otherwise, analysis may not be performed correctly.
Loosen
Hand clipper
for mixing
Fixing plate
Hexagonal wrench
Hand clipper
for piercing
F-bracket
Fixing screws