SYSMEX XE-5000 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 262

SYSMEX XE-5000 Скачать руководство пользователя страница 17

CHAPTER 2

Safety Information

Sysmex XE-5000 Instructions for Use

2-5

Revised July

2

007

2.7

Quality control materials

2.8

Laser

Caution!

• Do not inject or ingest.
• Follow directions on control material package insert.
• Avoid letting the control material come in contact with

dust, dirt or bacteria.

• Control material must not be used after their

expiration date.

• Take care not to spill control material. If spilled, follow

your laboratory's prescribed cleaning and
decontamination procedures.

Warning!

The XE-5000 contains the semiconductor laser unit.
This semiconductor laser unit is shielded with the
shield box cover, and is provided with an interlock
system that prevents laser from oscillation if the cover
is removed. Do not open this cover. Otherwise, the
laser beam can damage your eyes.

Laser Diode

NOTE: This caution label is located

inside the Laser Unit Cover.

«
...
15
16
17
18
19
...
»

Содержание XE-5000







































































































































































































































































Отзывы:

Нет отзывов