SYSMEX XE-5000 Скачать руководство пользователя страница 52

Страница: 52 / 262

CHAPTER 5

Before Using

5-2

Sysmex XE-5000 Instructions for Use

d A

l 20

5.3

Peripherals

Ledger printer (option)
Color graphic printer (option)
Data printer (option)
(For the functions of the printers, see “Chapter 3: 3.1
Overview”).

5.4

Additional components

Handheld barcode scanner (option)
A handheld barcode scanner scans the barcode on the
sample tube and automatically inputs the sample number.

Waste sensor unit (option)
Informs the operator that the waste container is full.

Caution!

• Turn the power switch of the instrument OFF before

connecting peripherals.

• Each peripheral device that is connected will need its

own power outlet. Do not plug multiple devices into
extensions and adaptors. Such wiring could cause
fire.

Note:

The ledger printer, color graphic printer and data
printer are optional.
Refer to the corresponding printer manuals for details
of their installation.

Note:

The handheld barcode scanner is optional.
Refer to the handheld barcode scanner manuals for
the connection method.

Note:

The waste sensor unit is optional.

Содержание XE-5000







































































































































































































































































Результаты поиска

Содержание XE-5000

Отзывы:

SYSMEX XE-5000, Инструкция по эксплуатации, Страница: 52 / 262

Результаты поиска

Содержание XE-5000

Отзывы: