SYSMEX XE-5000, Инструкция по эксплуатации, Страница: 145 / 262

CHAPTER 9 Cleaning and Maintenance
Sysmex XE-5000 Instructions for Use 9-17
R
e
vi
se
d A
p
ri
l 20
07
9.10 Removing air bubbles from the flow cell in the optical detector block
When aggregation status of scattergram analyzed by the
optical detector block becomes worse, the air bubbles may
adhere to the flow cell in the optical detector block.
In this case, execute air bubble removal sequence by the
following procedure.
1. Select “Maint” on the function menu of the main menu
screen.
The Maintenance Sequence screen will appear.
2. Using the and keys, move the cursor to select “2.
Air Bubble Removal.”
3. If you select “Execute” on the function menu of the
Maintenance Sequence screen, the air bubble removal
sequence will start.
4. During the air bubble removal sequence, the Execution
screen will be displayed on the LCD screen.
9.11 Cleaning the flow cell in the optical detector block
When the message “Execute Rinse Flowcell” is displayed, the
flow cell in the optical detector may be dirty.
In this case, execute the flow cell rinse sequence by the
following procedure.
1. Press the HELP key on the Main Unit panel keypad. The
HELP screen will appear.
Also, the sequence can be executed according to the
procedure described below.
1. Select “Maint” on the function menu of the main menu
screen.
The Maintenance Sequence screen will appear.
2. Using the and keys, move the cursor to select “4.
Rinse Flowcell.”
3. If you set CELLCLEAN to the manual aspiration pipette,
and select “Execute” on the function menu of the
Maintenance Sequence screen, the flow cell rinse
sequence will start.
4. During the flow cell rinse sequence, the Execution screen
will be displayed on the LCD screen.