SV 258 PRO (AG) User Manual
22
2. Insert a mini SIM-card into the slot of the modem. The
SIM-card PIN protection must be disabled.
3. A click sound indicates that the SIM-card is in the right
position. If necessary, use a tool (e.g. pen) to push the
SIM-card fully in.
4. Press
<Alt>+<Start>
on SVAN 958A to turn on the
system.
The station is programmed to automatically establish a 3G
connection with SvanNET. It takes up to 5 minutes to connect. The
most important parameter of the connection is the
APN
(Access
Point Name).
5. Check the Access Point Name (APN) setting in
SVAN 958A.
The default setting for the APN is "
internet
". It’s possible that your
Internet provider is using different APN. In this case, the APN must
be entered manually, either via the PC software or the
SVAN 958AG
menu
(
path:
<Menu> /
Remote
/
Modem Connection / APN
).
Note: The station is supplied with SVAN 958A configured for connection with SvanNET. If for some
reasons you have changed factory settings, you always may restore them with the use of
Factory Settings option.
Note:
If above steps don’t result in connection with SvanNET or you wish to connect to the other
server, you have to configure remote communication parameters in your SVAN 958A according to
the SVAN 958A User Manual or Chapter
. In the case of further problems consult your local
distributer or SVANTEK.
3.5 A
SSEMBLING THE STATION
1. The system consists of two carrying cases. Before the use
check the serial numbers on labels located on the front
side of both cases and ensure they are a matching set.
