Supermicro SSE-G2252, Руководство пользователя

Страница: 660 / 1401

Chapter 20: System Management Commands
File Management
– 668 –
running-config - Keyword that allows you to copy to/from the
current running configuration.
sftp - Keyword that copies a file to or from a SFTP server.
startup-config - The configuration used for system initialization.
tftp - Keyword that allows you to copy to/from a TFTP server.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
•
The system prompts for data required to complete the copy command.
•
The destination file name should not contain slashes (\ or /), and the
maximum length for file names is 32 characters for files on the switch
or 127 characters for files on the server. (Valid characters: A-Z, a-z,
0-9, “.”, “-”)
•
The switch supports only two operation code files, but the maximum
number of user-defined configuration files is 16.
•
You can use “Factory_Default_Config.cfg” as the source to copy from
the factory default configuration file, but you cannot use it as the
destination.
•
To replace the startup configuration, you must use startup-config as
the destination.
•
The Boot ROM and Loader cannot be uploaded or downloaded from the
FTP/SFTP/TFTP server. You must follow the instructions in the release
notes for new firmware, or contact your distributor for help.
•
For information on specifying an https-certificate, see “Replacing the
Default Secure-site Certificate” on page 293. For information on
configuring the switch to use HTTPS for a secure connection, see the ip
http secure-server command.
•
When logging into an FTP server, the interface prompts for a user name
and password configured on the remote server. Note that “anonymous”
is set as the default user name.
•
When logging into a remote SFTP server, the interface prompts for a
user name and password configured on the remote server. If this is a
first time connection, the system checks to see if the public key offered
by the server matches one stored locally. If not, the server’s public key
will be copied to the local system.
•
Secure Shell FTP (SFTP) provides a method of transferring files
between two network devices over an SSH2-secured connection. SFTP
functions similar to Secure Copy (SCP), using SSH for user
authentication and data encryption.