Supermicro SSE-G2252, Руководство пользователя

Страница: 471 / 1401

Chapter 14: Basic Administration Protocols
Connectivity Fault Management
– 478 –
P
ARAMETERS
These parameters are displayed:
Creating a Maintenance Domain
•
MD Index – Domain index. (Range: 1-65535)
•
MD Name – Maintenance domain name. (Range: 1-43 alphanumeric
characters)
•
MD Level – Authorized maintenance level for this domain.
(Range: 0-7)
•
MIP Creation Type – Specifies the CFM protocol’s creation method for
maintenance intermediate points (MIPs) in this domain:
•
Default – MIPs can be created for any maintenance association
(MA) configured in this domain on any bridge port through which
the MA’s VID can pass.
•
Explicit – MIPs can be created for any MA configured in this domain
only on bridge ports through which the MA’s VID can pass, and only
if a maintenance end point (MEP) is created at some lower MA
Level.
•
None – No MIP can be created for any MA configured in this
domain.
Configuring Detailed Settings for a Maintenance Domain
•
MD Index – Domain index. (Range: 1-65535)
3 remErrXcon DefErrorCCM, DefXconCCM or DefRemoteCCM.
4 errXcon DefErrorCCM or DefXconCCM.
5 xcon DefXconCCM
6 noXcon No defects DefXconCCM or lower are to be reported.
Table 14-13: MEP Defect Descriptions
Defect Description
DefMACstatus Either some remote MEP is reporting its Interface Status TLV as not isUp,
or all remote MEPs are reporting a Port Status TLV that contains some value
other than psUp.
DefRemoteCCM The MEP is not receiving valid CCMs from at least one of the remote MEPs.
DefErrorCCM The MEP has received at least one invalid CCM whose CCM Interval has not
yet timed out.
DefXconCCM The MEP has received at least one CCM from either another MAID or a lower
MD Level whose CCM Interval has not yet timed out.
Table 14-12: Remote MEP Priority Levels
Priority Level Level Name Description