Supermicro SSE-G2252, Руководство пользователя

Страница: 1186 / 1401

Chapter 39: Multicast Filtering Commands
MLD Filtering and Throttling
– 1199 –
high-ipv6-address - A valid IPv6 address (X:X:X:X::X) for the end
of a multicast group range.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
MLD Profile Configuration
C
OMMAND
U
SAGE
Enter this command multiple times to specify more than one multicast
address or address range for a profile.
E
XAMPLE
Console(config-mld-profile)#range ff01::0101 ff01::0202
Console(config-mld-profile)#
ipv6 mld filter
(Interface Configuration)
This command assigns an MLD filtering profile to an interface on the
switch. Use the no form to remove a profile from an interface.
S
YNTAX
[ no ] ipv6 mld filter profile-number
profile-number - An MLD filter profile number.
(Range: 1-4294967295)
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Interface Configuration
C
OMMAND
U
SAGE
•
The MLD filtering profile must first be created with the ipv6 mld profile
command before being able to assign it to an interface.
•
Only one profile can be assigned to an interface.
•
A profile can also be assigned to a trunk interface. When ports are
configured as trunk members, the trunk uses the filtering profile
assigned to the first port member in the trunk.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#ipv6 mld filter 19
Console(config-if)#