Supermicro SSE-G2252, Руководство пользователя

Страница: 738 / 1401

Chapter 22: Remote Monitoring Commands
– 748 –
rmon collection
history
This command periodically samples statistics on a physical interface. Use
the no form to disable periodic sampling.
S
YNTAX
rmon collection history controlEntry index
[ buckets number [ interval seconds ]] |
[ interval seconds ] |
[ owner name [ buckets number [ interval seconds ]]
no rmon collection history controlEntry index
index – Index to this entry. (Range: 1-65535)
number – The number of buckets requested for this entry.
(Range: 1-65536)
seconds – The polling interval. (Range: 1-3600 seconds)
name – Name of the person who created this entry. (Range: 1-127
characters)
D
EFAULT
S
ETTING
1.3.6.1.2.1.16.1.1.1.6.1 - 1.3.6.1.2.1.16.1.1.1.6.52
Buckets: 50
Interval: 30 seconds for even numbered entries,
1800 seconds for odd numbered entries
C
OMMAND
M
ODE
Interface Configuration (Ethernet)
C
OMMAND
U
SAGE
•
By default, each index number equates to a port on the switch, but can
be changed to any number not currently in use.
•
If periodic sampling is already enabled on an interface, the entry must
be deleted before any changes can be made with this command.
•
The information collected for each sample includes:
input octets, packets, broadcast packets, multicast packets, undersize
packets, oversize packets, fragments, jabbers, CRC alignment errors,
collisions, drop events, and network utilization.
•
The switch reserves two controlEntry index entries for each port. If a
default index entry is re-assigned to another port by this command, the
show running-config command will display a message indicating that
this index is not available for the port to which is normally assigned.
For example, if control entry 15 is assigned to port 5 as shown below,
the show running-config command will indicate that this entry is not
available for port 8.
Console(config)#interface ethernet 1/5