Supermicro SSE-G2252, Руководство пользователя

Страница: 723 / 1401

Chapter 21: SNMP Commands
– 732 –
S
YNTAX
snmp-server group groupname
{ v1 | v2c | v3 { auth | noauth | priv }}
[ read readview ] [ write writeview ] [ notify notifyview ]
no snmp-server group groupname
groupname - Name of an SNMP group. (Range: 1-32 characters)
v1 | v2c | v3 - Use SNMP version 1, 2c or 3.
auth | noauth | priv - This group uses SNMPv3 with
authentication, no authentication, or with authentication and
privacy. See “Simple Network Management Protocol” on page 400
for further information about these authentication and encryption
options.
readview - Defines the view for read access. (1-32 characters)
writeview - Defines the view for write access. (1-32 characters)
notifyview - Defines the view for notifications. (1-32 characters)
D
EFAULT
S
ETTING
Default groups: public 1 (read only), private 2 (read/write)
readview - Every object belonging to the Internet OID space (1).
writeview - Nothing is defined.
notifyview - Nothing is defined.
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
•
A group sets the access policy for the assigned users.
•
When authentication is selected, the MD5 or SHA algorithm is used as
specified in the snmp-server user command.
•
When privacy is selected, the DES 56-bit algorithm is used for data
encryption.
•
For additional information on the notification messages supported by
this switch, see Table 14-10, � $paratext>, � on page 409. Also, note
that the authentication, link-up and link-down messages are legacy
traps and must therefore be enabled in conjunction with the snmp-
server enable traps command.
E
XAMPLE
Console(config)#snmp-server group r&d v3 auth write daily
Console(config)#
1. No view is defined.
2. Maps to the defaultview.