Supermicro SSE-G2252, Руководство пользователя

Страница: 488 / 1401

Chapter 14: Basic Administration Protocols
Connectivity Fault Management
– 495 –
D
ISPLAYING
D
ETAILS
FOR
L
OCAL
MEP
S
Use the Administration > CFM > Show Information (Show Local MEP
Details) page to show detailed CFM information about a local MEP in the
continuity check database.
CLI R
EFERENCES
•
“show ethernet cfm maintenance-points local detail mep” on page 1285
P
ARAMETERS
These parameters are displayed:
•
MD Index – Domain index. (Range: 1-65535)
•
MA Index – MA identifier. (Range: 1-2147483647)
•
MEP ID – Maintenance end point identifier. (Range: 1-8191)
•
MD Name – The maintenance domain for this entry.
•
MA Name – Maintenance association to which this remote MEP
belongs.
•
MA Name Format – The format of the Maintenance Association name,
including Character String or ICC Based.
•
Level – Maintenance level of the local maintenance point.
•
Direction – The direction in which the MEP faces on the Bridge port (up
or down).
•
Interface – The port to which this MEP is attached.
•
CC Status – Shows if the MEP will generate CCM messages.
•
MAC Address – MAC address of the local maintenance point. (If a CCM
for the specified remote MEP has never been received or the local MEP
record times out, the address will be set to the initial value of all Fs.)
•
Defect Condition – Shows the defect detected on the MEP.
•
Received RDI – Receive status of remote defect indication (RDI)
messages on the MEP.
•
AIS Status – Shows if MEPs within the specified MA are enabled to
send frames with AIS information following detection of defect
conditions.
•
AIS Period – The interval at which AIS information is sent.
•
AIS Transmit Level – The maintenance level at which AIS information
will be sent for the specified MEP.
•
Suppress Alarm – Shows if the specified MEP is configured to
suppress sending frames containing AIS information following the
detection of defect conditions.