Supermicro SSE-G2252, Руководство пользователя

Страница: 476 / 1401

Chapter 14: Basic Administration Protocols
Connectivity Fault Management
– 483 –
The cross-check start delay, which sets the maximum delay this device
waits for a remote MEP to come up before starting the cross-check
operation, is a domain-level parameter. To set this parameter, use the
CFM MD Configuration screen (see Configuring CFM Maintenance
Domains).
•
AIS Status – Enables/disables suppression of the Alarm Indication
Signal (AIS). (Default: Enabled)
•
AIS Period – Configures the period at which AIS is sent in an MA.
(Range: 1 or 60 seconds; Default: 1 second)
•
AIS Transmit Level – Configure the AIS maintenance level in an MA.
(Range: 0-7; Default is 0)
AIS Level must follow this rule: AIS Level >= Domain Level
•
AIS Suppress Alarm – Enables/disables suppression of the AIS.
(Default: Disabled)
W
EB
I
NTERFACE
To create a maintenance association:
1.
Click Administration, CFM.
2.
Select Configure MA from the Step list.
3.
Select Add from the Action list.
4.
Select an entry from the MD Index list.
5.
Specify the MAs assigned to each domain, the VLAN through which CFM
messages are passed, and the manner in which MIPs can be created
within each MA.
6.
Click Apply.
Figure 14-74: Creating Maintenance Associations
To show the configured maintenance associations:
1.
Click Administration, CFM.