Supermicro SSE-G2252, Руководство пользователя

Страница: 403 / 1401

Chapter 14: Basic Administration Protocols
Simple Network Management Protocol
– 410 –
linkUp* 1.3.6.1.6.3.1.1.5.4 A linkUp trap signifies that the SNMP
entity, acting in an agent role, has
detected that the ifOperStatus object
for one of its communication links left
the down state and transitioned into
some other state (but not into the
notPresent state). This other state is
indicated by the included value of
ifOperStatus.
authenticationFailure* 1.3.6.1.6.3.1.1.5.5 An authenticationFailure trap signifies
that the SNMPv2 entity, acting in an
agent role, has received a protocol
message that is not properly
authenticated. While all
implementations of the SNMPv2 must
be capable of generating this trap, the
snmpEnableAuthenTraps object
indicates whether this trap will be
generated.
RMON Events (V2)
risingAlarm 1.3.6.1.2.1.16.0.1 The SNMP trap that is generated when
an alarm entry crosses its rising
threshold and generates an event that
is configured for sending SNMP traps.
fallingAlarm 1.3.6.1.2.1.16.0.2 The SNMP trap that is generated when
an alarm entry crosses its falling
threshold and generates an event that
is configured for sending SNMP traps.
Private Traps
swPowerStatusChangeTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.1 This trap is sent when the power state
changes.
swPortSecurityTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.36 This trap is sent when the port is being
intruded. This trap will only be sent
when the portSecActionTrap is
enabled.
swIpFilterRejectTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.40 This trap is sent when an incorrect IP
address is rejected by the IP filter.
pethPsePortOnOffNotification 1.3.6.1.4.1.259.10.1.39.2.1.0.43 This Notification indicates if a PSE Port
is delivering power to the PD. This
notification should be sent on every
status change except in searching
mode.
pethPsePortPowerMaintenanceStatusNotif
ication
1.3.6.1.4.1.259.10.1.39.2.1.0.44 This Notification indicates a Port
Change Status and should be sent on
every status change.
pethMainPowerUsageOnNotification 1.3.6.1.4.1.259.10.1.39.2.1.0.45 This Notification indicates PSE
Threshold usage indication is on; the
power usage is above the threshold.
pethMainPowerUsageOffNotification 1.3.6.1.4.1.259.10.1.39.2.1.0.46 This Notification indicates that the PSE
Threshold usage indication is off; the
usage power is below the threshold.
swAtcBcastStormAlarmFireTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.70 When broadcast traffic is detected as a
storm, this trap is fired.
swAtcBcastStormAlarmClearTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.71 When a broadcast storm is detected as
normal traffic, this trap is fired.
swAtcBcastStormTcApplyTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.72 When ATC is activated, this trap is
fired.
swAtcBcastStormTcReleaseTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.73 When ATC is released, this trap is fired.
Table 14-10: Supported Notification Messages (Continued)
Model Level Group