Supermicro SSE-G2252, Руководство пользователя

Страница: 1003 / 1401

Chapter 33: Address Table Commands
– 1015 –
vlan-id - VLAN ID (Range: 1-4094)
action -
delete-on-reset - Assignment lasts until the switch is reset.
permanent - Assignment is permanent.
D
EFAULT
S
ETTING
No static addresses are defined. The default mode is permanent .
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
The static address for a host device can be assigned to a specific port
within a specific VLAN. Use this command to add static addresses to the
MAC Address Table. Static addresses have the following characteristics:
•
Static addresses will not be removed from the address table when a
given interface link is down.
•
Static addresses are bound to the assigned interface and will not be
moved. When a static address is seen on another interface, the address
will be ignored and will not be written to the address table.
•
A static address cannot be learned on another port until the address is
removed with the no form of this command.
E
XAMPLE
Console(config)#mac-address-table static 00-e0-29-94-34-de interface ethernet
1/1 vlan 1 delete-on-reset
Console(config)#
mac-address-table
mac-learning vlan
This command enables MAC address learning on the selected VLAN. Use
the no form to disable this function.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
Console(config)#mac-address-table mac-learning vlan 2
Console(config)#
R
ELATED
C
OMMANDS
show vlan (1093)