Supermicro SSE-G2252, Руководство пользователя

Страница: 767 / 1401

Chapter 23: Authentication Commands
Web Server
– 778 –
S
YNTAX
ip http secure-port port_number
no ip http secure-port
port_number – The TCP port used for HTTPS. (Range: 1-65535)
D
EFAULT
S
ETTING
443
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
•
You cannot configure the HTTP and HTTPS servers to use the same
port.
•
If you change the HTTPS port number, clients attempting to connect to
the HTTPS server must specify the port number in the URL, in this
format: https://device:port_number
E
XAMPLE
Console(config)#ip http secure-port 1000
Console(config)#
R
ELATED
C
OMMANDS
ip http secure-server (778)
show system (661)
ip http
secure-server
This command enables the secure hypertext transfer protocol (HTTPS) over
the Secure Socket Layer (SSL), providing secure access (i.e., an encrypted
connection) to the switch’s web interface. Use the no form to disable this
function.
S
YNTAX
[ no ] ip http secure-server
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
•
Both HTTP and HTTPS service can be enabled independently on the
switch. However, you cannot configure the HTTP and HTTPS servers to
use the same UDP port.
•
If you enable HTTPS, you must indicate this in the URL that you specify
in your browser: https :// device [: port_number ]