Sun Microsystems SPARC T5120, Руководство по обслуживанию

Страница: 68 / 228

52 Sun SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
Note – In the ILOM shell there is no notification when the system is actually
powered off. Powering off takes about a minute. Use the
show /HOST
command to
determine if the host has powered off.
Related Information
■
“View the System Message Log Files” on page 49
■
“Display System Components” on page 51
■
“Enable System Components” on page 53
▼
Enable System Components
You enable a component by setting its
component_state
property to
Enabled
.
This removes the component from the ASR blacklist.
1. At the
->
prompt, set the
component_state
property to
Enabled
.
2. Reset the server so that the ASR command takes effect.
Note – In the ILOM shell there is no notification when the system is actually
powered off. Powering off takes about a minute. Use the
show /HOST
command to
determine if the host has powered off.
Related Information
■
“View the System Message Log Files” on page 49
■
“Display System Components” on page 51
■
“Disable System Components” on page 52
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS
-> set /SYS/MB/CMP0/BR1/CH0/D0 component_state=Enabled
-> stop /SYS
Are you sure you want to stop /SYS (y/n)? y
Stopping /SYS
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS