Sun Microsystems SPARC T5120, Руководство по обслуживанию

Страница: 54 / 228

38 Sun SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
Note – When you change individual POST parameter values, the
keyswitch_state
value must be set to
normal
.
keyswitch_state
Set to
normal
You put POST in its default mode by setting the virtual
keyswitch
property to
normal
. This enables the system to turn on and for POST to
run
.
keyswitch_state
Set to
diag
You can apply preconfigured diagnostic settings to POST operations by setting the
virtual
keyswitch
property to
diag
.
diag_mode
Set to
off
You can prevent POST from running by setting the
diag_mode
property to
off
.
diag_mode
Set to
service
You force POST to run with a set of preconfigured values for diag_level and
diag_verbosity
by setting the
diag_mode
property to
service
.
Related Information
■
“ILOM Properties that Affect POST Behavior” on page 35
■
“Run POST in Maximum Mode” on page 39
■
“Clear POST-Detected Faults” on page 41
-> set /SYS keyswitch_state=normal
Set ‘keyswitch_state’ to ‘normal’
-> set /SYS keyswitch_state=diag
Set ‘keyswitch_state’ to ‘diag’
-> set /SYS diag_mode=off
Set ‘diag_mode’ to ‘off’
-> set /SYS diag_mode=service
Set ‘diag_mode’ to ‘service’