Black plate (517,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
2. Remove the transmitter case from the
key head.
3. Open the transmitter case by releasing
the hooks.
1)
Negative (
−
) side facing up
4. Replace the old battery with a new
battery (type
CR1620
or equivalent) mak-
ing sure to install the new battery with the
negative (
−
) side facing up.
5. Put together the transmitter case by
fitting the hooks on the case.
6. Reinstall the transmitter case in the
key head.
7. Refit the removed half of the key head.
After the battery is replaced, the trans-
mitter must be synchronized with the
remote keyless entry system
’
s control
unit. Press either the
“ ”
or
“ ”
button
six times to synchronize the unit.
!
Models without tire pressure mon-
itoring system
1. Open the key head using a flat-head
screwdriver.
2. Remove the three screws and then
remove the cover.
3. Create a gap between the battery and
the case by pushing the battery gently
with your finger as shown in the illustra-
tion. Then, insert a flat-head screwdriver
Maintenance and service/Replacing battery
11-59
–
CONTINUED
–
11
