Subaru WRX-STI, Руководство пользователя

Страница: 369 / 578

Black plate (381,1)
一 般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
1) Upshift indicator
2) Downshift indicator
3) Gear position indicator
When the manual mode is selected, the
gear position indicator and upshift indica-
tor and/or downshift indicator on the
combination meter illuminate.
The gear position indicator shows the
currently selected gear in the following
range.
.
1st-to-8th-gear range (when the Sport
Sharp (S#) mode is selected (if equipped))
.
1st-to-6th-gear range (in other situa-
tions)
The upshift and downshift indicators show
when a gear shift is possible. When the
upshift indicator
“ ”
appears, upshifting is
possible. When the downshift indicator
“ ”
appears, downshifting is possible.
When both indicators appear, upshifting
and downshifting are both possible. When
the vehicle stops (for example, at traffic
signals), the downshift indicator turns off.
!
Gear shift indicator (if equipped)
When shifting up is recommended for
good fuel economy, the upshift indicator
blinks. When shifting down is recom-
mended, the downshift indicator blinks.
!
To upshift/downshift
Gearshifts can be performed using the
shift paddle behind the steering wheel.
To upshift to the next higher gear position,
pull the shift paddle that has
“
+
”
indicated
on it. To downshift to the next lower gear
position, pull the shift paddle that has
“ – ”
indicated on it.
!
To deselect the manual mode
To deselect the manual mode, return the
select lever to the
“
D
”
position from the
“
M
”
position.
&
Shift lock function
The shift lock function helps prevent the
improper operation of the select lever.
.
The select lever cannot be operated
unless the ignition switch is turned to the
“
ON
”
position and the brake pedal is
depressed.
.
The select lever cannot be moved from
the
“
P
”
position to any other position
before the brake pedal is depressed.
Depress the brake pedal first, and then
operate the select lever.
.
Only the
“
P
”
position allows you to turn
the ignition switch from the
“
ACC
”
position
to the
“
LOCK
”
/
“
OFF
”
position and remove
the key from the ignition switch.
.
If the ignition switch is turned to the
“
LOCK
”
/
“
OFF
”
position while the select
lever is in the
“
N
”
position, the select lever
may not be moved to the
“
P
”
position after
a period of time. Therefore, move the
select lever to the
“
P
”
position with the
brake pedal depressed soon after the
ignition switch is turned to the
“
LOCK
”
/
“
OFF
”
position.
Starting and operating/Continuously variable transmission
7-23
–
CONTINUED
–
7