Black plate (406,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
7-48
Starting and operating/Subaru Rear Vehicle Detection (SRVD)
!
To decrease the speed (by the
“
RES/SET
”
switch)
Press the
“
RES/SET
”
switch to the
“
SET
”
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and treated as the new
set speed.
U.K. models:
The set speed can be lowered 1 mph (1.6
km/h) each time by pressing the
“
RES/
SET
”
switch to the
“
SET
”
side quickly.
Except U.K. models:
The set speed can be lowered 1 km/h (0.6
mph) each time by pressing the
“
RES/
SET
”
switch to the
“
SET
”
side quickly.
!
To decrease the speed (by brake
pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed, press the
“
RES/SET
”
switch to the
“
SET
”
side once. Now the
desired speed is set and the vehicle will
keep running at that speed without de-
pressing the accelerator pedal.
&
Cruise control indicator
Refer to
&
Cruise control set indicator
Refer to
Subaru Rear Vehicle Detec-
tion (SRVD) (if equipped)
The Subaru Rear Vehicle Detection
(SRVD) consists of rear radar with Blind
Spot Detection, Lane Change Assist, and
Rear Cross Traffic Alert.
These functions enable the system to
detect objects or vehicles to the rear,
and alert the driver when changing lanes
or reversing the vehicle.
WARNING
The driver is responsible for driving
safely. Always be sure to check the
surroundings with your eyes when
changing lanes or reversing the
vehicle.
The system is designed to assist the
driver by monitoring the rear and
side areas of the vehicle during a
lane change or reversing. However,
you cannot rely on this system
alone in assuring the safety during
a lane change or reversing. Over-
confidence in this system could
result in an accident and lead to
serious injury or death. Since the
system operation has various limita-
tions, the flashing or illumination of
the SRVD approach indicator light