Black plate (382,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
7-24
Starting and operating/Continuously variable transmission
!
Shift lock release
If the select lever cannot be operated, turn
the ignition switch back to the
“
ON
”
position then move the select lever to the
“
P
”
position with the select lever button
pressed and brake pedal depressed.
If the select lever does not move after
performing the above procedure, perform
the following steps.
.
When the select lever cannot be
shifted from
“
P
”
to
“
N
”
:
Refer to
“
Shift lock release using the shift
.
When the select lever cannot be
shifted from
“
N
”
to
“
R
”
,
“
P
”
:
Within 60 seconds after placing the igni-
tion switch in the
“
ACC
”
position, move the
select lever to the
“
P
”
position with the
select lever button pressed and brake
pedal depressed.
If you must perform the above procedure,
the shift lock system (or the vehicle control
system) may be malfunctioning. We re-
commend that you contact a SUBARU
dealer for an inspection as soon as
possible.
If the select lever does not move after
performing the above procedure, refer to
“
Shift lock release using the shift lock
!
Shift lock release using the shift
lock release button
Perform the following procedure to release
the shift lock.
1. Apply the parking brake and stop the
engine.
2. Wrap the tip of a flat-head screwdriver
with vinyl tape or a cloth and use it to
remove the shift lock cover. The shift lock
release button is located under the shift
lock cover.
3. While depressing the brake pedal,
insert a screwdriver into the hole, press
the shift lock release button using a
screwdriver, and then move the select
lever.
If the select lever does not move after
performing the above procedure, the shift
lock system may be malfunctioning. We
recommend that you contact a SUBARU
dealer for an inspection as soon as
possible.
