Black plate (401,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
.
when starting backward facing uphill
.
when starting forward facing downhill
.
while the parking brake is applied
.
while the ignition switch is in the
“
ACC
”
or
“
LOCK
”
/
“
OFF
”
position
.
while the Hill start assist warning light/
Hill start assist OFF indicator light is
illuminated
When starting in reverse and using the Hill
start assist system, a braking effect may
be felt even after the brake pedal has
been released. However, this braking
effect should disappear once the clutch
pedal is released.
NOTE
A slight jolt may be felt when the
vehicle begins to move forward after
being reversed.
&
To activate/deactivate the Hill
start assist system
CAUTION
While the Hill start assist system is
deactivated, when starting on an
uphill grade, braking power is not
maintained if the brake pedal is
released. Start on an uphill grade
by using the parking brake.
You can activate/deactivate the Hill start
assist system according to the following
procedure.
NOTE
If an incorrect operation is performed,
place the ignition switch in the
“
LOCK
”
/
“
OFF
”
position and then start
over again.
!
To deactivate
1. Park your vehicle in a flat and safe
location and apply the parking brake.
2. Turn the ignition switch to the
“
LOCK
”
/
“
OFF
”
position.
3. Restart the engine.
4. Confirm the following items.
(1) The Brake system warning light
illuminates.
(2) The Vehicle Dynamics Control
warning light turns off.
(3) The Vehicle Dynamics Control
Starting and operating/Hill start assist system
7-43
–
CONTINUED
–
7