Black plate (171,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
4)
Warning indicator
5)
Select lever/gear position indicator (refer
to
“
Select lever/gear position indicator
6)
SI-DRIVE indicator (refer to
7)
Odometer (refer to
“
double trip meter (refer to
3-10.)/the settings of TPMS
Control switch
1)
Up (select)
2)
/SET (enter)
3)
Down (select)
The warning screen will return to the
original screen after a few seconds. While
the
“ ”
information reminder is on the
display, it may be possible to display the
warning screen again. To recall the mes-
sage marked with
“ ”
on the display, pull
the
“
/SET
”
switch on the steering wheel
toward you.
&
Basic operation
By operating
“ ”
or
“ ”
of the control
switch, the screens and selection items
can be switched. When the
“
/SET
”
switch is pulled toward you, the item can
be selected and set.
If there are some useful messages, such
as vehicle information, warning informa-
tion, etc., they will interrupt the current
screen, and appear on the display accom-
panied by a beep. If such a screen is
displayed, take proper action according to
the message shown on the screen.
&
Welcome screen
When the door is unlocked, and the
driver
’
s door is opened and then closed,
the welcome screen will appear for ap-
proximately 20 seconds.
NOTE
.
Once the welcome screen appears,
it takes a certain period of time to
display it again.
.
The welcome screen will disappear
when the ignition switch is turned to
the
“
ON
”
position while the welcome
screen is displayed.
.
If any of the doors (including the
trunk lid) is opened while the welcome
screen is displayed, the door ajar
warning will appear.
.
The welcome screen can be set to
Instruments and controls/Multi information display
3-37
–
CONTINUED
–
3