Black plate (389,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
NOTE
When you depress the brake pedal
strongly or suddenly, the following
phenomena occur. However, even
though these occur, they do not indi-
cate any malfunctions, and the brake
assist system is operating properly.
.
You might feel that the brake pedal
is applied by lighter force and gener-
ates a greater braking force.
.
You might hear the sound of the
ABS operating from the engine com-
partment.
!
Emergency Stop Signal
The Emergency Stop Signal is a function
that automatically blinks the hazard warn-
ing flasher in short intervals when the
brake pedal is depressed suddenly. The
rapid flashing of the hazard warning
flasher cautions the vehicles behind and
reduces the possibility of a collision.
CAUTION
The Emergency Stop Signal is acti-
vated in priority over the turn signal.
!
Operating condition
The Emergency Stop Signal activates
when all of the following conditions are
met.
.
The hazard warning flasher is off.
.
The vehicle speed is 60 km/h (37 mph)
or more.
.
The system judges that sudden braking
has occurred based on the vehicle decel-
eration when the brake pedal is de-
pressed.
!
Automatic cancel
The Emergency Stop Signal is canceled in
either of the following circumstances.
.
The hazard warning flasher is turned
on.
.
The brake pedal is released.
.
The system judges that sudden braking
has ended, based on the vehicle decel-
eration.
The operational/non-operational setting of
the Emergency Stop Signal can be chan-
ged by a SUBARU dealer. For details, we
recommend that you contact your
SUBARU dealer.
&
Disc brake pad wear warning
indicators
The disc brake pad wear warning indica-
tors on the disc brakes give a warning
noise when the brake pads are worn.
If a squeaking or scraping noise is heard
from the disc brakes while braking, we
recommend that you immediately have
your vehicle checked by your SUBARU
dealer.
Starting and operating/Braking
7-31
7