Subaru WRX-STI, Руководство пользователя

Страница: 33 / 578

Black plate (35,1)
一 般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
&
Power seat (driver
’
s seat
–
if
equipped)
1) Seat position forward/backward con-
trol switch
To adjust the seat forward or backward,
move the control switch forward or
backward. During forward/backward ad-
justment of the seat, you cannot adjust
the seat cushion angle or seat cushion
height.
2) Seat cushion angle control switch
To adjust the seat cushion angle, pull up
or push down the front end of the control
switch.
3) Seat height control switch
To adjust the seat height, pull up or push
down the rear end of the control switch.
4) Seatback angle (reclining) control
switch
To adjust the angle of the seatback,
move the control switch.
!
Memory function (if equipped)
WARNING
.
Never adjust the seat while driv-
ing to avoid loss of vehicle con-
trol and personal injury.
.
Before adjusting the seat, make
sure that cargo or the hands and
feet of rear seat passengers are
clear of the adjusting mechan-
ism.
.
Never retrieve the seat position
while driving to avoid loss of
vehicle control and personal in-
jury.
.
Perform the seat position retrie-
val before driving. Be sure to
confirm that the select lever is
in the
“
P
”
position (CVT models)
or that the shift lever is in the
neutral position (MT models),
and that the parking brake is
applied, when adjusting the seat
position. Do not drive until the
retrieval of the seat position is
complete.
.
When retrieving a registered seat
position, make sure the hands,
feet and possessions of rear seat
passengers are clear of the seat
adjusting mechanism.
.
When any unusual conditions or
malfunctions occur during the
retrieval of the seat position, stop
the retrieval of the seat position
by performing any of the follow-
ing procedures.
–
Operate any of the power seat
switches
–
Press the
“
SET
”
button
–
Press button
“
1
”
or
“
2
”
Some of your desired seat positions can
be registered. Register the seat position
with button
“
1
”
or
“
2
”
or each of the access
keys (if equipped) and retrieve the seat
position.
The following seat positions can be
registered.
.
Forward/backward position of the seat
.
Angle of seatback
.
Angle of seat cushion
.
Height of seat
!
Registration of seat position with
button
“
1
”
or
“
2
”
1. Adjust the seat position under the
following conditions.
.
The parking brake is applied.
.
The ignition switch is in the
“
LOCK
”
/
Seat, seatbelt and SRS airbags/Front seats
1-5
–
CONTINUED
–
1