Subaru WRX-STI, Руководство пользователя

Страница: 357 / 578

Black plate (369,1)
一 般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
NOTE
.
While pressing the select lever but-
ton in, the indicator on the push-button
ignition switch will not turn green even
when the select lever is in the
“
P
”
position.
.
In case the engine does not start by
the normal engine start procedure,
move the select lever to the
“
P
”
posi-
tion, and switch the power to
“
ACC
”
.
Depress the brake pedal, and press the
push-button ignition switch for at least
15 seconds. The engine may start. Only
use this engine start procedure in case
of emergency.
.
When the engine is not started, the
brake pedal may feel stiff. In such a
case, depress the brake pedal more
forcefully than usual. Check that the
operation indicator on the push-button
ignition switch turns green, and press
the push-button ignition switch to start
the engine.
&
Stopping engine
1. Stop the vehicle completely.
2. Move the select lever to the
“
P
”
position (CVT models).
3. Press the push-button ignition switch.
The engine will stop, and the power will be
switched to
“
OFF
”
.
WARNING
.
Do not touch the push-button
ignition switch during driving.
When the push-button ignition
switch is operated as follows,
the engine will stop.
–
The switch is pressed and held
for 3 seconds or longer.
–
The switch is pressed briefly 3
times or more in succession.
When the engine stops, the brake
booster will not function. A great-
er foot pressure will be required
on the brake pedal.
The power steering system will
not operate either. A greater
force will be required to steer,
and it may result in an accident.
.
If the engine stops during driving,
do not operate the push-button
ignition switch or open any of the
doors until the vehicle is stopped
in a safe location. It is dangerous
because the steering lock may be
activated. Stop the vehicle in a
safe location, and we recom-
m e n d t h a t y o u c o n t a c t a
SUBARU dealer immediately.
CAUTION
For CVT models:
.
Do not stop the engine while the
select lever is in a position other
than the
“
P
”
position.
.
If the engine is stopped while the
select lever is in a position other
than the
“
P
”
position, the power
will be in
“
ACC
”
. If the vehicle is
left in this condition, the battery
may be discharged.
NOTE
Although you can stop the engine by
operating the push-button ignition
switch, do not stop the engine during
driving except in an emergency.
&
When access key does not
operate properly
Refer to
“
Access key
–
if access key does
not operate properly
” F
9-17.
Starting and operating/Starting and stopping engine (models with push
–
button start system)
7-11
7