Black plate (447,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
Access key
–
if access key
does not operate properly
CAUTION
Keep metallic objects, magnetic
sources and signal transmitters
away from the area between the
access key and the push-button
ignition switch. They may interfere
with the communication between
the access key and the push-button
ignition switch.
The following functions may be inoperable
because of strong radio signals in the
surrounding area or the access key
battery being low.
.
Locking/unlocking doors
.
Switching power status
.
Starting engine
In such cases, perform the following
procedure. When the battery of the access
key is discharged, replace it with a new
one. Refer to
“
&
Locking and unlocking
1)
Release button
2)
Mechanical key
While pressing the release button of the
access key, take out the mechanical key.
Lock or unlock the driver
’
s door with the
mechanical key.
NOTE
After locking or unlocking, be sure to
reinsert the mechanical key into the
access key.
&
Switching power status
1. Apply the parking brake.
2. Shift the shift lever into neutral (MT
models) or the select lever into the
“
P
”
position (CVT models).
3. Depress the clutch pedal (MT models)
or brake pedal (CVT models).
4. Hold the access key with the buttons
facing you, and touch the push-button
ignition switch with it.
When the communication between the
access key and the vehicle is completed,
a chime (ding) will sound, and the opera-
tion indicator on the push-button ignition
switch illuminates in green. At the same
time, the status of the push-button ignition
switch changes to either of the following.
.
When the keyless access with push-
button start system is deactivated:
“
ACC
”
.
Under other conditions:
“
ON
”
5. When the keyless access with push-
button start system is deactivated, press
the push-button ignition switch with the
In case of emergency/Access key
–
if access key does not operate properly
9-17
–
CONTINUED
–
9
