Black plate (515,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
Replacing battery
The access key / transmitter battery may
be discharged under the following condi-
tions.
.
The operation of the keyless access
function is unstable
.
The operating distance of the remote
keyless entry system is unstable
.
The transmitter does not operate prop-
erly when used within the standard dis-
tance
Replace the battery with a new one.
CAUTION
.
Do not let dust, oil or water get on
or in the access key/transmitter
when replacing battery.
.
Be careful not to touch or da-
mage the printed circuit board in
the access key/transmitter when
replacing the battery.
.
Be careful not to allow children to
touch the battery and any re-
moved parts; children could
swallow them.
.
Danger of explosion if battery is
incorrectly replaced. Replace
only with the same or equivalent
type.
.
Batteries shall not be exposed to
excessive heat such as sun-
shine, fire or the like.
NOTE
.
Replace only with the same or
equivalent type of battery recom-
mended by the manufacturer.
.
Dispose of used batteries according
to the local laws.
.
Mount the battery in the correct
orientation to prevent fluid leakage.
Be careful not to bend the terminals. It
may result in a malfunction.
.
It is recommended that the battery
should be replaced by a SUBARU
dealer.
.
Use a new battery.
.
After replacing the battery, confirm
that the access key/transmitter func-
tions properly.
&
Replacing battery of access
key
CAUTION
When removing or reinstalling the
access key cover, make sure that
the plastic part does not come off or
become misaligned.
Battery: Button battery CR2032
1)
Release button
2)
Mechanical key
1. Take out the mechanical key.
Maintenance and service/Replacing battery
11-57
–
CONTINUED
–
11