Black plate (385,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
&
SI-DRIVE selector (STI)
When you rotate the SI-DRIVE selector to
the left, the current SI-DRIVE mode
changes to Sport (S) mode. When you
rotate it to the right, the mode changes to
Sport Sharp (S#) mode, and when you
push it, the mode changes to Intelligent (I)
mode. After performing this operation, the
switch returns to its original location.
NOTE
.
The next time you turn on the
engine, after you turned off the engine
in the Sport Sharp (S#) mode, the SI-
DRIVE mode changes to the Sport (S)
mode.
.
The next time you turn on the
engine, after you turned off the engine
in the Sport (S) mode or Intelligent (I)
mode, the SI-DRIVE mode will stay in
the same mode as when the engine
was turned off.
.
While the engine is running, if the
malfunction indicator light (CHECK
ENGINE light) illuminates, the SI-DRIVE
mode changes to the Sport (S) mode. In
this case, it is not possible to change to
the Sport Sharp (S#) mode or Intelligent
(I) mode.
.
If there is a possibility that the
engine could overheat because of a
temperature increase of the engine
coolant, it is not possible to change to
the Sport Sharp (S#) mode. While the
vehicle is in the Sport Sharp (S#) mode,
it changes to the Sport (S) mode when
the engine coolant temperature in-
creases.
.
If any of the SI-DRIVE indicators
blink, the SI-DRIVE system may be
malfunctioning. We recommend that
you contact your SUBARU dealer.
&
SI-DRIVE switches (except
STI)
SI-DRIVE switches
To select the Intelligent (I) mode, perform
either of the following procedures.
.
Press the
“
S/I
”
switch when the Sport
(S) mode is selected
.
Press the
“
S#/I
”
switch when the Sport
Sharp (S#) mode is selected
To select the Sport (S) mode, press the
“
S/
I
”
switch when any mode other than Sport
(S) mode is selected.
To select the Sport Sharp (S#) mode,
press the
“
S#/I
”
switch when any mode
other than Sport Sharp (S#) mode is
selected.
Starting and operating/SI
–
DRIVE
7-27
–
CONTINUED
–
7