Black plate (398,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
7-40
Starting and operating/Parking your vehicle
1. Press and hold the TPMS set switch
(for approximately 3 seconds). The current
TPMS mode will be displayed in the trip
meter display, and the TPMS mode can be
changed.
2. Briefly press the TPMS set switch to
change the mode. The mode will change
in the following sequence.
3. When the desired mode is displayed,
press and hold the switch (for approxi-
mately 3 seconds) to confirm the setting.
Once the setting is complete, the con-
firmation message will be displayed (for
example, if you select TPMS2,
“
TPMS2
SET
”
will be displayed).
After the TPMS mode is displayed, the trip
meter will appear again.
NOTE
If no operations are performed while
the TPMS mode selection is activated,
the display will return to the trip meter
after approximately 10 seconds.
Change the TPMS mode according to
the specified pressure shown on the
tire inflation pressure label.
Parking your vehicle
WARNING
.
Never leave unattended children
or pets in the vehicle. They could
accidentally injure themselves or
others through inadvertent op-
eration of the vehicle. Also, on
hot or sunny days, the tempera-
ture in a closed vehicle could
quickly become high enough to
cause severe or possibly fatal
injuries to them.
.
Do not park the vehicle over
flammable materials such as dry
grass, waste paper or rags, as
they may burn easily if they come
near hot engine or exhaust sys-
tem parts.
.
Be sure to stop the engine if you
take a nap in the vehicle. If
engine exhaust gas enters the
passenger compartment, occu-
pants in the vehicle could die
from carbon monoxide (CO) con-
tained in the exhaust gas.
