Black plate (446,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
9-16
In case of emergency/Towing
the plugs. After using the rear tie-down
holes, return the plugs to their original
places.
WARNING
Use the rear tie-down holes only for
downward anchoring. If they are
used to anchor the vehicle in any
other direction, cables may slip out
of the holes, possibly causing a
dangerous situation.
&
Using a flat-bed truck
This is the best way to transport your
vehicle. Use the following procedures to
ensure safe transportation.
1. Shift the select lever into the
“
P
”
position for CVT models or the shift lever
into
“
1st
”
for MT models.
2. Apply the parking brake firmly.
3. Secure the vehicle onto the carrier
properly with safety chains. Each of safety
chain should be equally tightened and
care must be taken not to pull the chains
so tightly that the suspension bottoms out.
&
Towing with all wheels on the
ground
1. Release the parking brake and put the
transmission in neutral.
2. The ignition switch should be in the
“
ON
”
position while the vehicle is being
towed.
3. Take up slack in the towline slowly to
prevent damage to the vehicle.
WARNING
.
Never turn the ignition switch to
the
“
LOCK
”
/
“
OFF
”
position while
the vehicle is being towed be-
cause the steering wheel and the
direction of the wheels will be
locked.
.
Remember that the brake booster
and power steering do not func-
tion when the engine is not
running. Because the engine is
turned off, it will take greater
effort to operate the brake pedal
and steering wheel.
CAUTION
.
If transmission failure occurs,
transport your vehicle on a flat-
bed truck.
.
For CVT models, the traveling
speed must be limited to less
than 30 km/h (20 mph) and the
traveling distance to less than 50
km (31 miles). For greater speeds
and distances, transport your
vehicle on a flat-bed truck.
