Subaru Legacy Outback 2006, Руководство пользователя

Страница: 207 / 456

5-40
Audio
T
FM/AM selection button
Push the “BAND” button when the radio is
on to select FM1, FM2 or AM reception.
T
Manual tuning (TUNE)
Push the tuning button marked “ ” to in-
crease the tuning frequency, and press
the tuning button marked “
” to de-
crease it.
Each time the button is pressed, the fre-
quency changes 0.1 MHz in the FM mode
and 9 kHz (5 kHz*) in the AM mode.
*: For left-hand drive vehicles: The tuning fre-
quency interval can be set to either 9 kHz or 5
kHz to suit the broadcasting area. Refer to
“Tuning frequency interval change function for
AM waveband (for left-hand drive vehicles)”.
V
Tuning frequency interval change
function for AM waveband (for left-
hand drive vehicles)
Select the tuning frequency interval (9 kHz
or 5 kHz) that is appropriate for the broad-
casting area where the radio is used. To
select an interval of 9 kHz, press the “1”
preset button for three seconds while
pressing the “BAND” button. The display
will show “9 kHz step”.
To select an interval of 5 kHz, press the
“2” preset button for three seconds while
pressing the “BAND” button. The display
will show “5 kHz step”.
V
Seek tuning (SEEK)
Push the tuning button for at least a
half second.
The radio will seek the next available sta-
500048
TUNE
TRACK
500049
1 2 3
4
5 6
500109