Subaru Legacy Outback 2006, Руководство пользователя

Страница: 282 / 456

Starting and operating
7-17
– CONTINUED –
NOTE
y
A 4th-to-3rd automatic downshift will
not occur at speeds above 80 km/h (50
mph) and a 3rd-to-2nd automatic
downshift will not occur at speeds
above 38 km/h (24 mph).
y
Automatic downshifts to 3rd or 2nd
may occur even when driving on a level
road depending on conditions, such as
how hard you depress the brake pedal.
„
Selector lever reverse inhibit-
ing function
This function prevents accidental move-
ment of the selector lever to the “R” posi-
tion while the vehicle is moving.
The function becomes operational when
the vehicle reaches a speed of approxi-
mately 10 km/h (6 mph). Once operation-
al, it prevents the selector lever from being
moved from the “N” position to the “R” po-
sition. When the vehicle speed drops be-
low 10 km/h (6 mph), the function is can-
celed. The selector lever can then be
moved to the “R” and “P” positions.
When the ignition switch has been turned
to the “LOCK” position, movement of the
selector lever from the “N” position to the
“P” position is possible for a limited time
period and then becomes impossible.
When movement of the selector lever
from the “N” position to the “P” position
has become impossible, turn the ignition
switch back to the “ON” position then
move the selector lever to the “P” position.
„
Selection of manual mode
With the vehicle either moving or station-
ary, move the selector lever from the “D”
position to the manual gate then move it to
the “+” end or “–” end of the manual gate
to select manual mode.
1) Upshift indicator
2) Downshift indicator
3) Gear position indicator
When the manual mode is selected, the
gear position indicator and upshift indica-
tor and/or downshift indicator in the ta-
chometer come on. The gear position indi-
cator shows the currently selected gear in
the 1st-to-4th-gear range. The upshift and
downshift indicators show when a gear-
shift is possible. When the upshift indica-
tor “
” is on, upshifting is possible.
When the downshift indicator “ ” is on,
downshifting is possible. When both indi-
cators are on, upshifting and downshifting
are both possible. When the vehicle stops
(for example, at traffic signals), the down-
shift indicator goes off.
700109
1
2
3
700308