Subaru Legacy Outback 2006, Руководство пользователя

Страница: 45 / 456

1-20
Seat, seatbelt and SRS airbags
V
Unfastening the seatbelt
Push the release button of the center
seatbelt buckle (on the left-hand side) to
unfasten the seatbelt.
NOTE
When the seatback is folded down for
greater cargo area, it is necessary to
disconnect the connector.
0
1. Insert a key or other hard pointed ob-
ject into the slot in the connector (buckle)
on the right-hand side and push it in, and
the connector (tongue) plate will discon-
nect from the buckle.
2. Allow the retractor to roll up the belt.
You should hold the webbing end and
guide it back into the retractor while it is
rolling up. Neatly store the tongue plates
in the recess in the retractor and then in-
sert the connector (tongue) plate into the
slot located at the front of the recess.
100116
200299
200300
y
Do not allow the retractor to roll
up the seatbelt too quickly. Other-
wise, the metal connector
(tongue) plates may hit against
the trim, resulting in damaged
trim.
100260