Subaru Legacy Outback 2006, Руководство пользователя

Страница: 161 / 456

4-10
Climate control
T
AUTO button
AUTO mode operation:
The Automatic Climate Control system
automatically controls the air temperature
of the passenger compartment in the
AUTO mode. When the “AUTO” button is
pressed, the indicator light “AUTO” on the
display comes on. In this state, fan speed,
air flow distribution, air-inlet control, and
air conditioner compressor operation are
automatically controlled.
Manual mode operation:
If you operate any of the buttons on the
control panel other than the “OFF” button
and temperature control dial during auto-
matic mode operation, the indicator light
“AUTO” on the control panel will go out.
You can then manually control the system
as desired using the button you operated.
To change the system back to the AUTO
mode, press the “AUTO” button.
T
OFF button
The Automatic Climate Control system
turns off (the air conditioner compressor
and fan turn off) when the “OFF” button is
pressed.
When the “OFF” button is pressed, the
outside air introduction mode (air inlet se-
lection OFF) is automatically selected.
T
Temperature control dial
This dial is used to set the desired interior
temperature. The set temperature is
shown by the display. With the dial set at
your desired temperature, the system au-
tomatically adjusts the temperature of air
supplied from the outlets such that the de-
sired temperature is achieved and main-
tained.
If the dial is turned fully counterclockwise,
the system gives maximum cooling perfor-
mance. If the dial is turned fully clockwise,
the system gives maximum heating per-
formance.
400353
400354
400355