Studer SW V4.0 OnAir 1000, Инструкция по эксплуатации и обслуживанию

Страница: 92 / 361

OnAir 1000 Digital Mixing Console
9-4 Automation
SW V 4.0 Date printed: 23.10.03
9.3.5 Indication of the Currently Playing Input Line
As the OnAir 1000 is not equipped with motor faders, a clear indication of
the channel currently “playing” is necessary.
Under the following conditions the respective channel label is in continous
scrolling mode, indicating “ON-AIR” if:
• Fader (audio level) is open;
• The channel is switched ON;
• The channel is assigned to program and/or record bus (as defined in the
Common Settings page);
• The channel is selected by the CAB (SOURCE_SELECTION).
9.3.6 Pre-Listening
When starting the pre-listening function in the CAB system by clicking on
the LISTEN button on the CAB screen, followed by selecting a title, the
CAB system immediately sends the desired title over the fourth channel of
its audio card. At the same time, it opens the external PFL input, so that
the desired title is audible in the console's PFL loudspeaker.
9.3.7 Time Synchronization
The CAB is able to set the console's internal clock (time and date) if TIME
SYNC. is set to AUTOMATION in the TIME & DATE FORMAT page;
refer to
chapter 11.2.5 .