Studer SW V4.0 OnAir 1000, Инструкция по эксплуатации и обслуживанию

Страница: 91 / 361

OnAir 1000 Digital Mixing Console
Date printed: 23.10.03 SW V 4.0
Automation 9-3
AUTO
TAKE
OVER
AUTO
TAKE
OVER
AUTO
TAKE
OVER
9.3.3 Output Selection
The CAB is able to control the output assignment (program/record bus) of
the currently selected input of any input channel. This allows, for instance,
to route speech to the program output, and music to the record output.
9.3.4 Start a New Title from Schedule
In automation mode, the CAB can start a new title automatically (it is also
possible to start new titles manually; then, the operator opens the fader
while the input channel is already switched ON, or switches the desired
channel ON while the fader is already open).
Automatic New Title Start: The CAB can control the console automatically. This automatic mode
must be activated from within the CAB and can, for example, be used for
controlling a program during the night without any assistance.
If the CAB runs in automatic mode, it starts playback of the source and
opens the appropriate input channel with the pre-defined level and fade-in
time. This will send a new audio level to the DSP, and switch the input
channel ON in any case.
If a take ends, the CAB performs a cross-fade on its audio card, the se-
lected channels on the console remain open.
If the CAB changes the audio level, the channel changes into auto takeover
mode . This means that the audio level (i.e. actual DSP level) and the fader
level (i.e. physical position of the fader knob) differ for more than a speci-
fied auto takeover window. If the fader is moved now, nothing will change
until the physical position of the fader knob is within the auto takeover
window. Then the auto takeover mode is left.
Auto takeover mode is indicated in the fader strip by the two AUTO
TAKEOVER arrow LEDs. The operator can recognize the direction in
which he has to move the fader in order to leave auto takeover mode and
take control of the signal level. If the physical position of the fader is
brought within the auto takeover window or if it accidentally is situated
within the window, both arrow LEDs will be illuminated.
Channels not con-
trolled by a CAB
system
Audio level above
the fader position –
move fader
down
Audio level below
the fader position –
move fader
up
Audio level
equal to the
fader position
AUTO
TAKE
OVER
AUTO
TAKE
OVER